- Drivers
- Driver catalog
- FormC alarm contact
- Manufacturer
- eze System
- Protocol
- Built in
- Package
- Basic services (BASIC)
- Updated
- 2024-06-10
- Driver ID
- 258
Notes
This driver allows full monitoring of a FormC (SPDT) contact with a single input on the ezeio. The driver will detect wiring faults (short/open) as well as both sides of the contact (NO / NC). The driver can also be used to monitor two separate SPST contacts.
Registers 5
| # | Name | Unit | Description |
|---|---|---|---|
| 1 | NC input status (on=open) | 0 if contact is closed. 100 if contact is open. | |
| 2 | NO input status (on=open) | 0 if contact is closed. 100 if contact is open. | |
| 3 | Fault open | 0 if no fault. 100 is fault (open) | |
| 4 | Fault short | 0 if no fault. 100 if fault (shorted) | |
| 5 | Resistance | Ohm | Resistance reading in Ohms |